Parex Monoaccel plus formally know as Axel 3000 20ltr
an admixture used to reduce the initial setting time of one-coat renders and other general mortars.
Add directly to the mixing water and mix with the render. Replace 0.2L - 0.3L of water
volume for mixing a 25kg or 30kg bag, with 0.2L - 0.3L of AXEL 3000, mixing the water and AXEL 3000 together first before mixing with the render.
When AXEL 3000 is used, always add the same amount to all mixes used on the project and ensure that a whole facade is coated as there is likely to be a colour shade difference should the AXEL 3000 only be used in part of the facade mix.
Avoid adding more than the stated quantities as this may affect the fi nish, performance and colour of the render.
For guidance only, the setting time advantage when used at the recommended dosage rate is between 1½ to 2 hours at 5°C.
This information is provided as guidance only.
1 to 2 litres for the normal capacity of a spray render machine (mix of 6 x 30 kg bags) depending on weather conditions.
Adding more than the recommended AXEL 3000 will not produce a faster setting time.
An excessive mixing ratio may be detrimental to the application and overall appearance of the product.
A preliminary test is recommended.
In cold weather, the ‘Conditions of use’ for one-coat renders must be respected when using AXEL 3000.
Renders must not be applied on frozen or thawing substrates or when there is a risk of the substrate freezing over.
The use of AXEL 3000 is designed only to assist in reducing the initial setting time for one-coat render systems during cold weather periods.
The product may have less of an effect in highly damp conditions.